Find out how to use the Glasurit Products and which process can be applied how

2022-0040b-GL

100 Line 3-stage process

You will acquire systematic insights into the application of 100 Line 3-stage process for automotive refinishing. You will be familiar with the various refinishing methods (panel repair and blending in on the adjacent panel).  
2022-0020-GL

22 Line DIRECT GLOSS - 2K TOPCOAT PROCESS

You will acquire systematic insights into the application of solventborne direct-gloss topcoat for automotive refinishing.
2024-0023-GL

90 Line - Basecoat process 3-stage

You will acquire systematic insights into the application of waterborne 3-stage topcoats for automotive refinishing. All of the products, methods and working steps are illustrated to enable you to achieve the best possible results as efficiently as possible..
0022-0000-GL

Basecoat process 2 Stage - 55 Line

You will acquire systematic insights into the application of 2-stage solventborne topcoats for automotive refinishing.
0024-0000-GL

Basecoat Process 3-stage – 55 Line

The objective of this module is as follows: You will acquire systematic insights into the application of solventborne three-stage topcoats for automotive refinishing.
2022-0012-GL

BASIC KNOWLEDGE "PREPARATION"

You will acquire systematic insights into the different substrate materials/substrates (types of metal and plastic) and their pre-treatment with respect to cleaning and sanding. All products, methods and steps involved in the preparation process, up to and including the application of body filler,
2022-0038-GL

Basic Knowledge "Bodyshop Equipment"

You will acquire systematic insights into the equipment needed in a paint shop.
2022-0031-GL

Basic Knowledge “Finishing & Polishing”

You will learn about the finishing and polishing aspects of a refinishing job. The guideline is very general and does not show any specialist system.
2022-0019-GL

Basic Knowledge "Topcoats"

You will acquire basic knowledge about the processes and products prescribed for the refinishing process and for performing the Glasurit Topcoat application steps correctly.
0002-0000-GL

Basic Knowledge - Color

You will obtain basic knowledge about separate working steps required for color reproduction, starting with influencing factors up to the creation of spray-outs. In addition, you will be introduced to various tools for color assessment.
2022-0008-GL

Color and paint preparation

Provides technicians with a thorough explanation of the color and paint preparation to avoid failures during the mixing process.
0030-0000-GL

Color and Design

Provides technicians with a thorough explanation of the Refinish Processes which are “Color and Design” related.
0001-0000-GL

Color Physics

You will acquire basic knowledge about color physics.
0005a-0000-GL

Digital Color Retrieval with Spectrophotometer

You will acquire knowledge about how to find the right color with the spectrophotometer quickly.
2022-0013-GL

Drying processes / systems

The drying of a preparatory product and/or paint is a crucial phase in automotive refinishing.
2022-0042d-GL_ BA1.3

Dust-nib rectification technique 100 Line

You will acquire systematic insight into the application and approach of repairing 100 Line basecoat if dust particles or contamination happen on the wet painted layer, whilst or after applying base coat.
2022-0035-GL_RP1.3

Fast Repair

You will learn how to use the Fast Repair Process to repair an approx. DIN A5-size damage site and a maximum of one to three panels.
2022-0036-GL

Glasurit One Stop

Provides technicians with a thorough explanation of Glasurit One Stop with regard to the concept, set-up, targets, benefits and procedure for working at the Glasurit One Stop.
2022-0014-GL_PP1.3

New Plastic Part

You will acquire systematic insights into the application of new plastic panels for automotive refinishing. All products, methods and steps involved in the repair process with new panels are illustrated.
2022-0012b-GL

Preparation "Fade out area"

Technicians are provided with a thorough explanation of the concept and procedures of the preparation of the fade-out area as well as the preparation, if a complete re-painting of the color (color change) is requested. Thorough preparation is a very important basis for several following modules.
2022-0060-GL

RADAR & SENSORS

You will acquire basic knowledge about RADARs sensors used in vehicles and how these are impacting automotive refinish. You will also acquire some general rules for repairing of bumpers with RADAR sensors installed behind as well as how RADAR formulation should be retrieved.
0084-0000-GL

Refinity - Inventory management

Welcome to our new Refinity platform which is going to help you to manage your paint shop. This guide will show you the “Inventory Management”.
0081-0000-GL

Refinity - Mix Application

Welcome to our new Refinish Cloud - Mixing Module for color retrieval with Refinity. This guide will show you the “Quick way to mix”. If you need further assistance for detailed use of system, please get in contact with your local BASF color experts.
0082-0000-GL

Refinity Scan Application

Welcome to our new Color Refinish Cloud - Spectro Module. The following guide will show you how to use the new “Spectro Module” with its new features which will be available in Refinity.
0083-0000-GL

Repair Order Management

Welcome to our new Refinity platform which is going to help you to manage your paint shop. This guide will show you the “Repair Order Management”.
2022-0015-GL_(PP1.3)

Repair Plastic Part

Select, correctly prepare and apply body filler, primer and fillers, according to the type of plastic being repaired.
2022-0032-GL_RP1.1

Spot Repair Process with 100 Line, 90 Line, 55 Line

Technicians are provided with a thorough explanation of the concept, set-up, targets, benefits and procedures of the spot repair process. The spot repair process is designed for the repair of smaller scratches and minor stone-chipping damage.  This process is not suitable for damage repair but